B&B Electronics OP10 - Manual - Manual (Page 24)

The Converted Data= (original register data – Min Input) * (Eng. Max – Eng.Min) / (Max
Input – Min Input)
2.5.9 Data Setting
Continue the configuration of the parameter-setting window. Press to show a dotted
box moving with the cursor. Move the cursor until the proper position is reached, then click the
left button to confirm the position. Select the “Set” checkbox. So the component has the function
of monitoring and setting the data.
If the “Set” checkbox is selected, two additional options, “Encrypt” and “Upper/Lower
Limited”, are enabled.
„ Encrypt
To enhance the security of the device, the operation of parameter setting can be
protected by password.
To set or change the password, activate the command “Tool(T)” “Encryption lever
set” to pop up a dialog for password setting:
21