B&B Electronics OP10 - Manual - Manual (Page 21)

2.5.8 Data Display
This section will introduce how to make a Set parameter screen. The methods of setting the
components such as parameter display, parameter setting and password setting are discussed in
detail.
The procedure of making the screen:
Click [Tool] [New Screen] or click the screen description to pop up a dialog box for setting
the screen number and the screen description.
„ Screen Num:
The serial number of the new screen.
„ Screen Description
Descript the character of the new screen.
Click the blank of the screen editing region or click the screen description in the left of the
dialogue box to pop “Screen Property” dialogue box of the current screen.
„ “Up”/“Down” Key To Screen:
Choose the screen which to jump to when the [ ]/[ ] key pressed.
„ Option
Choose the communication port of the current screen. OP10 supports different screens
in one project communicating with other devices through different ports.
Put the data display boxes. Press to show a rectangular dotted box moving with the
cursor. Click the left button in the proper position. The number “12345” in the dotted box
indicates that this component is a five-digits register displaying/setting box.
18