B&B Electronics OP10 - Manual - Manual (Page 11)

New screen, pressing the key “New” in the screen indicator will also
new a screen.
Edit the attribute of the screen
Change a screen with the copy of another one
Delete the current screen
Designate the initial screen. When the display is running, the system
will return to the initial screen directly if [ESC] is pressed. Usually
the main menu or the screen most-frequently used is set to be the
initial screen; set the system password; set the definition number of
the interactive controlling register.
Login the Alarm List information. Every piece of information
represents a status of the select variable.
Set Chief button
Change the data of the registers with the copy of another device.
Preset dynamic text
Preset register
Press or activate [File] [New] command in the menu to pop up a dialog box for PLC
selection:
Select the proper PLC type. Then click “Set” button down beside the port name to set
communication parameter.
8