B&B Electronics OP10 - Manual - Manual (Page 10)

2.5 Editing the User’s Screen
2.5.1 Create a New Project
Run the software OP10-PCLINK and create a project, after which a screen editor will be
showed on the screen.
The screen-editing region is on the center of the editor. There is a grid of white dots in the
display region. The distance between every two rows and two columns is 16 points. The whole
region is a matrix of 192*64 points. The user can refer to the dots nearby to align the components
when laying or moving them. When necessary, change X and Y positions of the components to
locate them in arbitrary positions.
The table below is the description of all the buttons in the toolbar:
Button Function
Create a new project
Open project
Save project
Download the configuration project to OP10.
Upload the project inside OP10
Translate and edit the project, show the information of the project.
7