beautypg.com

Installation guide – Veris Industries H8822 Install User Manual

Page 11

background image

VERIS INDUSTRIES

H8822

INSTALLATION GUIDE

ZL0056-0C

PAGE 11

©2010 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]

06101

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

Alarm Setup

The Modbus Alarms section provides the ability to send messages when alarm levels
are exceeded. Messages can be sent by email, snmp, or displayed on the LCD console.
Alarms are processed at the end of the data logging period. For more frequent
alarms, shorten the data log interval. Log readings and alarm processing can be set to
as often as once per minute.

Display all alarms on LCD console: When checked, all alarm messages are
shown on the LCD display of the AcquiSuite.

SNMP Trap Send Enabled: When checked, SNMP Trap messages are sent after
every log period for each data point that is in an alarm state. The trap includes
information about the AcquiSuite system data point and alarm state. A full
MIB is located on the AcquiSuite, click the MIB link to the right of this option.

SNMP Trap Host 1 (2,3): When SNMP traps are enabled, a trap message is sent
to each of the trap host addresses. Specify the trap host by IP address, not
DNS name.

Direct email on alarm: When checked, the AcquiSuite will send an email
message when any data point changes its alarm state.

SMTP Mail Server Address: The IP address of the email server on the LAN that
will process and forward the email message to the recipient.

Sender address: The address that will be used in the “From:” line of the
email. This is helpful in identifying the source of the alarm email message. If
your SMTP mail server has junk filtering, you may be required to use a sender
address that matches a mailbox address on the SMTP mail server; check with
your mail server administrator for specific details on this issue.

Recipient address 1 (2,3): The AcquiSuite can send a copy of the alarm notice
to multiple email addresses. Specify one, two, or three email addresses in the
fields provided for the recipient addresses.