Veris Industries A8332–8F2D Datasheet - Manual

net
w
ork inte
gra
tion
VERIS INDUSTRIES
800.354.8556 +1 503.598.4564 www.veris.com
SPECIFICATIONS
Processor ARM 7, field upgradable firmware
LED 8 input status LEDs (red), 2 Modbus TX/RX (yellow), 1 power/alive status (green)
Protocols Modbus/ RTU
Power Supply 24VDC, 200mA (not included)
Serial Port RS-485 Modbus, 19200 or 9600 baud. N81
Inputs 8x, user selectable; 0-10V: Min/Max/Ave/Instantaneous; 4-20mA: Min/Max/Ave/Instantaneous;
Pulse: Consumption, Rate; Resistance: 0-10V: Min/Max/Ave/Instantaneous
Maximum Pulse Rate 10 Hz
Contact Closure Threshold 1 kΩ
Isolation RS-485 port is optically isolated
Operating Environment:
North America Indoor, -30° to 70°C (32° to 122°F), 0-95% RH noncondensing
DESCRIPTION
The A8332-8F2D Input Module provides a convenient way to optimize energy use
and accurately allocate costs. Add eight standard pulse and/or analog sensors to a
data acquisition network. Integrate your Veris network sensors through the A8332-
8F2D to a Veris H8822 Data Acquisition Server.
The A8332-8F2D is the first truly flexible input module that allows incorporation of
virtually any industry-standard sensor through a single device. The module can be
incorporated with cost-effective data acquisition and wireless metering solutions
such as the H8822 AcquiSuite DR™ server, which, as a properly integrated system,
provides high performance and low cost. This system can be incorporated into a new
or existing Building Automation System (BAS). Using the AcquiSuite data acquisition
system, users can set input types (pulse, analog, resistive, etc.), giving access to real
time resource consumption for a facility on a single board.
APPLICATIONS
● Demand response program control and reporting
● Cost allocation to tenants and third parties
● Measurement and verification of energy savings
● Converting pulse inputs from water and gas flow meters to a Modbus network
● Monitoring performance of building systems (e.g., chillers, boilers, fans)
FEATURES
● Network up to 8 industry-standard sensors to the AcquiSuite data
acquisition network
● Universal inputs simplify setup...just connect sensors and select device output
type via the AcquiSuite or using Obvius configuration software
● Check device status at a glance...LED indicators allow for fast recognition of on/
off status, TX/RX communications, and 8 input notifications
● Field-selectable address DIP switch...no software or PC configuration required
● High reliability...nonvolatile memory retains configuration and pulse data
during power failures
● All configuration information and input data is stored in non-volatile memory
to prevent data loss in the event of power failure
● 8 user selectable universal inputs to aggregate analog, pulse, and resistance
sensors/meters
Pulse/Analog To
Modbus® Converter
A8332-8F2D is sold as an open device.
Observe handling precautions for static sensitive
devices to avoid damage to the circuitry which
would not be covered under the factory warranty.
Year
Warranty
5
A8332-8F2D
Flexible I/O Module
A8332–8F2D
HQ0001805.B 01131