Veris Industries PVE SERIES Install User Manual
Pg/pv/pge/pve, Gauge pressure sensors, Installation guide
VERIS INDUSTRIES
™
environmental SenSorS
inStallation GUiDe
ZL0064-0A
PAGE 1
©2009 Veris Industries USA 800.354.8556 or +1(0)503.598.4564 / [email protected]
11091
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Gauge Pressure Sensors
Installer’s Specifications
Electrical:
Supply Voltage
10-28 VDC
Output
Deluxe: 0-5/0-10 VDC (3-wire) or 4-20 mA (2-wire)
Economy: 1-5 VDC (3 wire) or 4-20 mA (2-wire)
Load Impedance
>100kΩ
Standard Connection
Cable gland 24” (600mm) length
Pressure Port
1/4”NPT Male
Performance at 25°C (77°F):
Accuracy *
Deluxe: ±0.25% BFSL **
Economy: ±0.50% BFSL **
Media Compatibility
Fluids & gases compatible with 316L stainless steel
Pressure Cycles
>100 million cycles
Over Pressure
2x F.S. without change in calibration
Burst Pressure
5x rated pressure or 20,000 PSI
Environmental:
Shock
100G, 11 msec, 1/2 sine
Vibration
Deluxe: 20G peak, 20 to 2400 Hz
Economy: 10G peak, 20 to 2000 Hz
EMI/RFI Protection
Deluxe: yes
Economy: no
Rating
Deluxe: IP-66
Economy: IP-65
Operating Temperature Range
-40° to 85°C (-40° to 185°F)
Compensated Temperature Range
0° to 55°C (32° to 130°F)
Total Error Band Over Temperature
<±1% of FS
Humidity
0-95% RH, non-condensing
* Accuracy includes nonlinearity and hysteresis.
** BFSL = Best fit straight line
PG/PV/PGE/PVE
PG/PV/PGE/PVE
/05*$&
t 5IJTQSPEVDUJTOPUJOUFOEFEGPSMJGFPSTBGFUZBQQMJDBUJPOT
t %POPUJOTUBMMUIJTQSPEVDUJOIB[BSEPVTPSDMBTTJmFEMPDBUJPOT
t 3FBEBOEVOEFSTUBOEUIFJOTUSVDUJPOTCFGPSFJOTUBMMJOH
UIJTQSPEVDU
t 5VSOPõBMMQPXFSTVQQMZJOHFRVJQNFOUCFGPSFXPSLJOHPOJU
t 5IFJOTUBMMFSJTSFTQPOTJCMFGPSDPOGPSNBODFUPBMMBQQMJDBCMFDPEFT
Product IdentIfIcatIon
quIck Install
Insert probe into area to be measured.
1.
Wire according to diagrams. See Wiring section.
2.
PGE/PVE
PG/PV
Range
03 = 0 to 15 psig
(Deluxe only)
04 = 0 to 25 psig
05 = 0 to 50 psig
06 = 0 to 75 psig
07 = 0 to 100 psig
08 = 0 to 250 psig
09 = 0 to 500 psig
10 = 0 to 1000 psig
11 = 0 to 5000 psig
12 = 0 to 10000 psig
PG
Wetted Material
Output
B = 1-5VDC (economy only)
M = 4-20mA
V = 0-10VDC (deluxe only)
J = 0-5VDC (deluxe only)
A
Range
03 = -14.7 to 15 psig
(Deluxe only)
04 = -14.7 to 25 psig
05 = -14.7 to 50 psig
06 = -14.7 to 75 psig
07 = -14.7 to 100 psig
08 = -14.7 to 250 psig
09 = -14.7 to 500 psig
10 = -14.7 to 1000 psig
11 = -14.7 to 5000 psig
12 = -14.7 to 10000 psig
PV
= 316L stainless steel
Output
A
Call factory for ranges not shown.
Type
Blank = Deluxe
E = Economy
Type
Blank = Deluxe
E = Economy
Wetted Material
B = 1-5VDC (economy only)
M = 4-20mA
V = 0-10VDC (deluxe only)
J = 0-5VDC (deluxe only)
= 316L stainless steel