M&C TechGroup PMA 100 Operator's manual - Manual (Page 4)

M&C Products Analysentechnik GmbH 9-3.12-ME
- 4 -
4. Used terms and signal indication
These are persons with necessary qualification, who are
familiar with installation, use and maintenance of the
product.
The signals are used according to DIN 4844 and
EU Recommendation 91/C53/06.
These are important informations about the product or
parts of the instruction manual which require user’s
attention.
5. Introduction
5.1 Analyser model
The Oxygen analyser type PMA100 is produced by M&C
Products Analysentechnik in Ratingen, Germany.
5.2 Patent references
The M&C paramagnetic measuring cell is patented in
Europe and the USA under the following patent numbers:
• Germany
Pat.-Nr. 36 33 750
• France Pat.-Nr. 87 13 608
• United Kingdom Pat.-Nr. 21 96 127
• The Netherlands Pat.-Nr. 188 2449
• USA Pat.-Nr. 4,807,463
5.3 Serial number
The type plate with the serial number is located at the back
panel of the analyser. Whenever you call M&C regarding
questions or orders for spares please give us the serial
number of your PMA.
5.4 Power supply
The power supply for the oxygen analyser PMA100 is 230V,
50Hz or 115V, 60Hz (‘a’ added to the Serial-No.). For detailed
information please look at the type plate of your analyser.
Variations of the power supply in a range of +10% to - 15%
have no influence on the function of the analyser.
5.5 Mounting system
The analyser is build in a 19“ housing, for rack or table-
mounting.
SKILLED STAFF