M&C TechGroup EC-30_FD Operator's manual - Manual (Page 14)

14
Gas sampling and gas conditioning technology 3-4.20-ME
The heat energy from the cooling system is drawn off by the forced ventilated condenser. The LED
function display on the front of the cooler shows the operating status. Alarm warnings for over- and
under-temperature are given as a collective status alarm via a relais output with two potential-free
changeover contacts.
11 RECEPTION AND STORAGE
The EC-30(/FD) gas cooler is a complete pre-installed unit.

Carefully inspect the EC-30(/FD) and any special accessories included immediately on arrival by
removing them from the packing and checking for missing articles against the packing list!

Check the items for any damage in transit and, if required, inform the shipping insurance
company immediately of the damage found!

The tubing for the heat exchangers is dismounted for shipping and it is separately inside of the
package.
N O T E !
The cooler must be stored in a weather-protected frost-free area!
N O T E !
During transport and when in storage, the cooler has always to stand vertical
with the transport feet positioned underneath so that the oil in the closed
compressor circuit cannot run out of this compressor case. If the cooler is
transported on its back by mistake, it has to stand in the operating position
for approx. 24 hours before it is switched on!