Define still/start mode window – EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual User Manual
Page 72

IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
Issue 5.6.D
63
•
If the playlist is in PAUSE or EDIT mode, the element on which a jump-on-time
is defined will be played with the speed defined for it but without its transition
parameters (A/V effect and duration).
•
If the playlist is loaded on a channel later than the time defined for the jump-on-
time, the playout of the element will not be triggered.
•
When a playlist is being played, the “remaining time until next transition” and
“remaining time until next break”, will be adapted taking into account the jump-
on-time condition.
Limitation for the Use of Jump on Time and/or Start on Time
•
Several triggers cannot be defined for the same playlist element, i.e. two jump-
on-time conditions, two start-on-time conditions or a start-on-time condition and
a jump-on-time condition.
Defining a new condition will remove or overwrite the first one.
•
Several triggers with the same time and date cannot be defined for the same
playlist.
•
Two triggers cannot be defined for the same playlist if their respective time and
date are too closed to each other, i.e. in the range [time-guardband,
time+guardband].
D
EFINE
S
TILL
/S
TART
M
ODE
W
INDOW
When right-clicking on a playlist element and selecting Define still/start mode
from the Playlist Element contextual menu, the Define Still/Start Mode window
opens.