How to replace a clip by a lnked cip, 6 grouping elements in a playlist, Introduction – EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual User Manual
Page 61: 6 ‘grouping elements in a playlist, Rouping, Lements in a, Laylist
Issue 5.6.D
IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
52
Note
If the selected clip has no linked clip, the sub-menu only displays No
linked clip.
H
OW TO
R
EPLACE A
C
LIP BY A
L
NKED
C
IP
To replace a clip selected in a playlist by a linked clip, proceed as follows:
1.
Select the clip in the playlist that you want to replace by one of its linked
clips.
2.
Right-click the element.
The Playlist Element contextual menu is displayed.
3.
Select Replace by a linked clip from the contextual menu.
A sub menu is displayed including all clips linked to the selected clip.
4.
From the list, select the linked clip that will replace the selected clip.
A popup window is displayed:
5.
Press OK.
1.5.6 G
ROUPING
E
LEMENTS IN A
P
LAYLIST
I
NTRODUCTION
When several consecutive elements are selected in the playlist, they can be
grouped together using dedicated command from the Playlist Element contextual
menu.
A group of elements can be displayed in a collapsed view or in an expanded view
by clicking on the group title line.
A group name or associated colour can then be edited by selected the Edit Group
option of the Playlist Element contextual menu.