3 moving within a playlist element, How to jump to a remaining time value, How to jump to an element timecode – EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual User Manual
Page 40: 3 ‘moving within a playlist element, Oving within a, Laylist, Lement
IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
Issue 5.6.D
31
1.4.3 M
OVING WITHIN A
P
LAYLIST
E
LEMENT
Two options enable the users to define a point in time where they want the system
to jump to, within a playlist element. This permits the review of a specific part of a
subject before it is played out.
H
OW TO
J
UMP TO A
R
EMAINING
T
IME
V
ALUE
From the Time until Transition field, it is possible to perform a jump to a defined
time before the OUT point of a selected element. To do so, proceed as follows:
1.
Select a playlist element.
2.
Click in the Time Until Transition field
OR
press
key.
The value displayed is ’00:00:00:00’.
3.
Enter the remaining time duration, corresponding to the point you want the
system jumps to.
4.
Press ENTER.
The system jumps to the timecode corresponding to the remaining time duration
before the OUT point.
H
OW TO
J
UMP TO AN
E
LEMENT
T
IMECODE
To jump to a specific timecode within an element, proceed as follows:
1.
Select a playlist element.
2.
Click in the GoTo Element Timecode button
OR
press
key.
The GoTo Element Timecode zone is displayed.