EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual - Manual (Page 123)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
114
Possible options are:
‘Link to’ option Description
Current position
(default value) Audio Swap macro command will be linked to the current
position, i.e. the timecode corresponding to the use of the
macro command.
Mark IN Audio Swap macro command will be linked to the IN point
of the element.
Mark OUT Audio Swap macro command will be linked to the OUT
point of the element.
Mix Duration
Displays the mix duration value of the selected pre-defined configuration. This
value may be changed. Limit values are 00s00 to 20s00.
Swap Audio Grid
Displays the Swap Audio grid of the selected pre-defined configuration. This can
be changed by the operator by moving the dots to other intersections.
A
CTION
= E
FFECT
(A
UDIO AND
/
OR
V
IDEO
)
When an Effect action is applied to an element, a transition audio and video effect
is applied. Refer to section 1.6.1 ‘Adding audio and/or video effects’ on page 56
for more information on this effect.
Selecting Effect action in the Playlist Macro Commands Settings displays the
Define Audio/Video Effect window.
Effect Duration
Allows you defining duration of the audio and video transition effects, in case ‘mix’
or ‘wipe’ has been selected.