EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual - Manual (Page 114)

IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
Issue 5.6.D
105
• selecting Mix or Wipe for the video effect results in a Mix effect for the audio.
Select the duration for the video transition effect in seconds and frames. The
same duration will automatically apply to the audio transition effect.
D
EFAULT
S
TILL AND
S
TART
M
ODE
Defines the default stop (still) and start modes of elements added to a playlist.
Still Mode
The still mode setting determines if the playlist should stop on the selected
element and if it should stop where it stops and how it should behave.
The options are:
• Stop on first frame of current clip
• Stop on last frame of previous clip
• Stop on last frame of the previous clip, wait, then jump on first
The playlist will stop on the last frame of the previous clip, then jump on the
first frame of the selected element after a certain time which is defined in the
value box.
Start Mode
If a Still mode is defined, one of the following start modes must be defined on the
selected element. If Automatically was already selected when a Still mode is
defined, it will be changed to the Manually option of start mode as the modes are
mutually exclusive.
• Manually: the selected element must be started manually (by a play or play var
command) on the Playlist Panel, keyboard or ShuttlePRO controller.
• On GPI : the selected element will be started when a GPI trigger is received on
the corresponding XT[2] server (the one the playlist is to be played on). The
GPI number and its trigger mode are defined in the Tools > Settings > Input
GPIS category.
When On GPI is selected, the corresponding GPI, which has been configured to
start a PLAY command on the on-air channel associated to the Playlist Panel, is
displayed in the description field.
• On Time, at: the element will start at the defined time.
o
Start only if the element is loaded on the channel: the playout will only be
started if the element is loaded on the channel at the specified time (start-on-
time).
o
Start eveny if the element is not loaded on the channel: the playout will be
started even if the element is not loaded on the channel as far as the playlist
is loaded on the channel (jump-on-time).