EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual - Manual (Page 31)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
22
1.3.5 PGM/PRV M
ODE
To be able to play a playlist with the effects, the channel mode must be set to
PGM/PRV.
The preview channel is used to preview clips or trains or playlist elements, in
order to trim them on a different channel than the one that the playlist is being
played to air from.
When the operators right-click the Channel Name field, the contextual menu
provides a sub-menu for the Mode option.
In this menu, PGM/PRV is only available if the player channel is a odd numbered
channel of the XT[2], for example the PGM must be channel 1 and the associated
PRV must be channel 2, channel 3 can be PGM with associated PRV channel 4,
and finally channel 5 can be a PGM with channel 6 as the associated PRV.
When the operator selects 1 PGM, the playlist will be played in cut mode on only 1
output. If the channel was in PGM/PRV mode, the mode is automatically reset.
When the operator selects PGM/PRV, the playlist will be played on 2 outputs
(effects will be taken into account). The channels are automatically set into
PGM/PRV mode.
PGM/PRV will not become active unless:
• the operator has the right to control both channels,
• both channels are under the control of the IPDirector (check 2 n d control
settings),
• either of the 2 channels is locked, by the user or another user.
Note
In PGM/PRV mode, the PRV could be controlled in PARALLEL with a
secondary device, which could take the control of the channel at any
time.