EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual - Manual (Page 57)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
48
Field Description
• a value calculated based on a duration from the IN
point
OUT Zone – Unknown The OUT point of the element is not known, it is an
open end element. The element will be played out
with the defined delay until an OUT point is entered.
OUT Zone - T/C OUT This defines the timecode until which the train will be
played on. If the T/C value is greater than the on-air
T/C of the element, a warning message will be
displayed.
OUT Zone - Duration This defines the duration for the element to be
inserted in the playlist.
1.5.2 M
OVING ELEMENTS
W
ITHIN A
P
LAYLIST
P
OSSIBLE
O
PERATIONS
Playlist Elements can be moved within the playlist in one of the three following
ways:
• A drag-and-drop operation within the Playlist Panel
• A drag-and-drop operation within the Clip-List of the Control Panel
• Cut/Copy/Paste operations using the Windows shortcut keys (CTRL+X, CTRL+C
and CTRL+V)
• Cut/Copy/Paste options in the Clip contextual menu of the Clip-List tab in the
Control Panel. Refer to Control Panel chapter in part 5 of the user manual.
H
OW TO
M
OVE
E
LEMENTS IN A
P
LAYLIST BY A
D
RAG
-
AND
-
D
ROP
O
PERATION
In the playlist open in the Playlist Panel, proceed as follows:
1. Select one or more elements within the list (this could be a playlist element,
group or comment)
Use CTRL + Click or SHIFT + click for a multiselection.
2. Drag it/them at the position where you want to move. During the drag and
drop operation, a black line will be displayed between the positions where
the elements will be dropped in order to highlight the drop position.