EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 77)

Operation
User
Interface
Button
Keyboard
Shortcut
Description
Mark IN Sets an IN point at the timecode shown in
the Current Timecode field.
Mark OUT Sets an OUT point at the timecode shown in
the Current Timecode field.
Clear IN
+
Clears the IN point which has just been set.
Clear
OUT
+
Clears the OUT point which has just been
set.
Goto IN Moves the current position to the Mark IN
point of a clip being digitized.
Goto OUT Moves the current position to the Mark OUT
point of a clip being digitized.
How to Mark a Clip on a Tape
To mark a portion of a tape media, proceed as follows:
1. Mark an IN point in one of the following ways:
◦ Use the clip creation function (button or shortcut) to set an IN point at the required
timecode.
◦ Enter the timecode of the requested IN point in the IN field and press ENTER.
The IN point is set:
2. Mark an OUT point in one of the following ways:
◦ Use the clip creation function to set an OUT point at the required timecode
◦ Enter the timecode of the requested OUT point in the OUT field and press
ENTER.
The OUT point is set:
The clip duration is displayed in the Duration field.
IPDirector - Version 6.00 - User Manual - Ingest Modules
3. VTR Control Panel 67