EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 14)

◦ Timecode and date and TC type (LTC or user)
◦ Timecode and TC type
2. Select one of the options.
3. When the TC type is displayed, right-clicking it in the Current Timecode field permits
to shift from one type to the other (LTC or user).
4. When the date is displayed, right-clicking it in the Current Timecode field opens a
calendar to allow a date selection.
Start Record and Stop Record Buttons
The following table gives the meaning of each recording operation. A button and/or a
keyboard shortcut can be used to perform each action.
Operation
User
Interface
Button
Keyboard
Shortcut
Description
Start
Record
+
Starts the recording from a recorder
channel of an EVS video server.
It can only be used in IPDP Spotbox mode.
See section "Recorder Panel Use
Depending on EVS Video Server Mode" on
page 5.
When the server is recording, the button
turns to and is not available.
Stop
Record
+
Stops the recording from a recorder
channel of an EVS video server.
It can only be used in IPDP Spotbox mode.
See section "Recorder Panel Use
Depending on EVS Video Server Mode" on
page 5.
1.2.3. Clip Creation Pane
User Interface Elements
The table below gives an explanation for each user interface element displayed in the Clip
Creation pane.
User Interface
Element
Description
IN field Timecode of the IN point for the clip being created.
Duration field Time interval between the IN and OUT point, i.e. clip duration.
OUT field Timecode of the OUT point for the clip being created.
4 1. Recorder Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A