EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 68)

User Interface
Element
Description
Tape ID This identifies the tape on which the clip is stored.
Clip Name User-defined name for the clip. It can contain up to 24 alphanumeric
characters.
Only 12 characters of this name can be displayed by LSM systems.
VarID VarID is a 32-character ID with variable length and format. It is
automatically assigned to new clip. It is mainly used to ensure
redundancy on the system. It can be unique for a clip on the EVS
server level or on the XNet network level, depending on EVS video
server settings.
UmID Unique Material Identification. UmID is a fixed length 8–character ID.
The EVS server automatically assigns a UmID to each new clip. It is
used for the unique identification of a clip on an XNet network.
Interest Level Buttons
The Interest Level buttons allow users to assign an interest rating to a clip. Four interest
levels can be defined, from no star to 3 stars. The background of the button corresponding
to the selected interest level is blue. The default value is the no star level.
Clip Type Buttons
The Clip Type buttons allow you to assign a clip type for use with Key and Fill operations.
• The left button is used for normal clips. This is the default value.
• The middle button is used for fill clips.
• The right button is used for key clips.
Refer to section "Fill and Key Clips" for more information.
Keywords List
58 3. VTR Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A