EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 17)

2. Select the recorder channel to assign.
1.4. Creating a Clip
1.4.1. Introduction
As soon as a recorder channel has been selected, users can create a new clip from the
record train thanks to the clip creation functions of the Clip Creation pane.
1.4.2. Clip Settings
Several settings related to clip creation can be defined under Tools > Settings. They
relate to the display of the Save Clip window, automatic ways to name clips would the
Save Clip window be displayed or not, the guardbands duration or the default clip duration.
Specific settings also exist for the creation of clips on ganged recorders, the creation of
sub-clips from linked clips, or the trimming of linked clips.
See the General Functions user manual .
1.4.3. How to Create a Clip
To create a clip from the Recorder Panel module, proceed as follows:
1. Click the Mark IN button
The IN point is set.
2. Click the Mark OUT button
The OUT point is set and the clip duration is displayed in the Duration field.
3. Click the Save button.
◦ If the Show Save Clip Window setting has not beenselected in the Tools >
Settings > Clips > General category, the clip is saved according to the settings
defined in the Tools > Settings > Autoname category.
The procedure is finished.
IPDirector - Version 6.00 - User Manual - Ingest Modules
1. Recorder Panel 7