EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 43)

• Click the New Schedule button on the Menu bar
• Right-click one of the track and select New Schedule from the contextual menu
• Using the mouse, draw a block with a drag-and-drop operation by clicking within a
sub-track from the desired IN point and moving to the right up to the desired OUT point
Each step corresponds to a fixed duration which varies according to the zoom factor
applied to the timeline.
Rules for Channel Association
When an ingest is created by a drag-and-drop operation, the scheduled ingest blocks are
also created on all associated recorders in case of multiselection or ganged channels.
If the user can view high resolution and low resolution channels, the following rules apply.
• An ingest created on a high resolution XT recorder is automatically associated to an
ingest on the corresponding low resolution XT recorder.
• A low resolution stream is always associated to a high resolution XT clip and/or a high
resolution stream.
• CTRL + SHIFT + drag-and-drop operation on a recorder channel will create an ingest
on all the channels of the same source (high resolution XT recorder, low resolution XT
recorder, high resolution and low resolution stream).
How to Schedule a One-Shot Ingest
To schedule a One-Shot ingest, proceed as follows:
1. Proceed in one way listed in section "Possible Ways to Schedule an Ingest" on page
32.
The New Schedule window opens.
2. Enter a name in the Name field.
3. In the Schedule on area, select the recorder(s), to create an XT clip on the EVS video
server and/or select the stream(s) to create a file on the default target.
IPDirector - Version 6.00 - User Manual - Ingest Modules
2. Ingest Scheduler 33