EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 72)

3.3.3. How to Assign a VTR Device from the VTR
Name Field
To assign a VTR from the VTR Name field, proceed as follows:
1. Select from the main menu of IPDirector.
A VTR Control Panel window opens with a dimmed display as a VTR has yet to be
assigned.
2. Right-click the VTR Name field:
This displays a contextual menu which lists the available VTR devices.
3. Select the VTR to assign from the contextual menu.
3.4. Moving Through Media
3.4.1. Introduction
The Transport Functions pane provides a jog bar and more transport buttons to navigate in
the tape media. In addition, the Current Timecode field allows to directly jump to a given
timecode within the media.
Some transport functions are available from the Clip Creation pane to allow to move in the
clip being digitized.
3.4.2. Transport Functions
Jog Bar
The jog bar controls the tape speed.
The slider can be dragged to the left or to the right with the left mouse button. It returns to
the zero state as soon as the mouse button is released.
The slider can be "parked" at a fixed position by right-clicking the jog bar at the desired
position. To return the slider to the zero state, left-click anywhere in the jog bar.
62 3. VTR Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A