EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 41)

Ingest Type
Button
Display
Action of Stop button
Growing clip and
recording ingest
overlapped Stops the recording of the selected clip.
If no clip is selected, the Stop button is
unavailable.
These rules apply to clips and to streams.
Rules Based on the Channels Selection
See section "Channel Selection" on page 15 for ways to select channels.
• Clicking the Start button starts the recording of a growing clip or a stream on all the
selected channels and all the channels ganged with the selected channels.
• Pressing the CTRL key + the Start button starts the recording of a growing clip or a
stream only on the selected channels.
• Clicking the Stop button stops the recording of the clip or the stream on all the
selected channels and all the channels ganged with the selected channels.
• Pressing the CTRL key + the Stop button stops the recording of the clip or the stream
only on the selected channels.
2.5.4. Creating Growing Clips
Introduction
A growing clip is an ingest without any OUT point. This type of block has no stop time. It
will continue recording until a user stops it manually.
It displays as follows, on the left of the nowline:
Possible Ways to Start to Record a Growing Clip
A growing clip can be started in several different ways listed below.
When starting to record a growing clip in one of the following ways, the New Schedule
window will always open with the One-shot tab only and a start time only.
• From the Tree view of the Channel Explorer, right-click a recorder channel and select
Open Ingest Scheduler (new ingest) or Start XT Ingest from the contextual menu.
• From the Recorder view of the Channel Explorer, right-click a recorder channel and
select Open Ingest Scheduler (new ingest) or Start Ingest on Selected Channels
from the contextual menu.
• From the Recorder view of the Channel Explorer, click the Record Now button .
IPDirector - Version 6.00 - User Manual - Ingest Modules
2. Ingest Scheduler 31