beautypg.com

2 manual transfer, Manual transfer of just recorded clips, Manual transfer of a clip during review – EVS INSIO Version 1.0 - October 2009 User's Manual User Manual

Page 80: Manual transfer, 2 ‘manual transfer’ o, 73 fo

background image

INSIO Version 1.0 – User Manual

EVS Broadcast Equipment – October 2009

Issue 1.0.D

73

they are saved. Refer to section 5.3.3 ‘Recording a Take’ on page 48 for more

information.

6.3.2 M

ANUAL

T

RANSFER

Manuel transfer of clips can occur at different times:

just after the recording and manual or automatic saving of a clip. This is

performed from the Record tab, for all the clips saved from a take, when the
Automatic Transfer mode is not activated.

when reviewing a recorded clip. This is performed from the Review tab, for the

single selected clip.

at any times, by selecting clips in one of the Clip List tabs. In this case,

multiple clips can be selected.

Therefore, a Transfer button is present on the four tabs of the Record/Review
window. The operator will have to press the Transfer button to initialise the
transfer of clips to predefined transfer destinations.

M

ANUAL

T

RANSFER OF

J

UST

R

ECORDED

C

LIPS

When a take has just been recorded and saved, as described in section 5.3.3
Recording a Take’ on page 48, it can be transferred to the predefined transfer
destination(s) by pressing the Transfer button at the bottom of the Record tab.

The clips saved for the selected take will then be transferred.

M

ANUAL

T

RANSFER OF A

C

LIP

D

URING

R

EVIEW

When a clip has been loaded on a playback channel for review, as described in

section 5.4.3 ‘Loading Media’ on page 54, it can be transferred to the transfer
destination(s) by pressing the Transfer button at the bottom of the Review tab.

Only the selected (highlighted) clip will then be transferred.

M

ANUAL

T

RANSFER OF

O

NE OR

S

EVERAL

C

LIPS AT THE

E

ND

OF A

R

ECORDING

S

ESSION

Clips are not always transferred just after their recording but can be transferred at
once after a recording session or at the end of the day. This can be performed

from one of the two Clip List tabs.

You can select a single clip or multiple clips to be transferred. You can also select
the line corresponding to a take or a scene, so, the clips from the entire take or
scene will be respectively transferred.