beautypg.com

5 assigning metadata, 6 viewing record trains, Assigning metadata – EVS INSIO Version 1.0 - October 2009 User's Manual User Manual

Page 73: Viewing record trains

background image

Issue 1.0.D

INSIO Version 1.0 – User Manual

EVS Broadcast Equipment – October 2009

66

Important

If the edited take is not the last recorded one, e.g. take 1 to 5 exist and
take 2 is edited, updated clips will be saved under take number 6.
Pay attention that there is no way to see on which original clips updated
clips are based.

5.5 ASSIGNING METADATA

The Metadata tab displays the user fields defined in Setup > User > Metadata. It
makes it possible to view and modify the metadata values related to the take.

You can enter metadata values once recording has started or modify them while
recording, or, later on, for a take selected in the left Clip List tab.

Metadata values entered for a clip are automatically assigned to all the clips from
the take.

5.6 VIEWING RECORD TRAINS

Record trains can be loaded on playback channels and viewed on the Video
Player, such as the recorded clips.

To load and view record trains, proceed as follows:

1.

Press the Administrative Tasks button

in the upper left corner of the

Record/Review window.

The Administrative Tasks dialog box opens.

2.

Press the View Input button. It becomes active:

3.

Press the Exit button

to exit the window.