EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 43)

Issue 1.0.D INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
36
C
ONDENSED
T
RANSFER
S
TATUS
W
INDOW
This area gives quick information on the jobs transfer status. Refer to section 6
‘Transferring Media’ on page 68.
4.3.3 H
OW TO
A
DD A
P
ROGRAM
/ E
PISODE
To define a program/episode for a project, proceed as follows:
1.
Click the Add a Program/Episode button.
The Edit Episode/Program window is displayed and the settings applicable
to the project for the active mode (Setup > User > General) and the
configuration (Setup > User > Predefined Configurations) are displayed.
The project name is displayed in the Project/Production field but cannot be
edited.
2. Enter a name for the episode/program in the Episode/Program Name field.
3. If you want to apply Active Mode setting specific to this new episode, open
the Active Mode tab and modify the selected options. Refer to section 3.2.1
‘User General Settings on page 7 for a detailed explanation of the setting.
4. Select the configuration for your episode: open the Configuration tab where
you can
• select an existing configuration from the Configurations list,
• add a new configuration with the Add New Configuration button
• copy and edit the selected configuration by pressing the Copy Current
Configuration and Edit button
.