EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 18)

INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
Issue 1.0.D
11
How to Rename an Existing Configuration
To rename an existing configuration, proceed as follows:
1. Select a configuration from the Configuration field:
2. In the Name field of the Name & Description pane in the General tab, enter
the new name.
The configuration name is automatically updated in the Configuration Field.
G
ENERAL
T
AB
From this area, you can set the default configuration and define the clip name
format.
Default Configuration
When selected, the system considers the selected configuration as the default
configuration.