EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 65)

Issue 1.0.D INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
58
5. You can unload a clip by selecting the line in the Review tab and pressing
the Unload Clip button.
L
OADING
C
LIPS
R
ECORDED
E
ARLIER ON
P
LAYER
C
HANNELS
You have the possibility to review takes later on during the recording session, by
selecting clips from the Left Clip List tab.
You can do this in two different ways:
• manually, by selecting the clips and the playback channels one by one
• manually, by selecting a preset player channel configuration
How to Manually Load Previously Recorded Clips
When you want to load clips previously recorded on playback channels, you can
select clips from different takes or scenes. Proceed as follows:
1. From the Left Clip List tab, select the clip you want to review from the
Scene>Take>Clip view.
The corresponding line is highlighted.
2. From the Review tab, select the player channel you want to load the clip
onto.
The corresponding player channel line is highlighted.
3.
Press the Load Clip button .
The clip is loaded on the Video Player.
The clip name is displayed on the player channel line, in the Review tab.