EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 25)

Issue 1.0.D INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
18
How to Group Cameras
When many cameras are used, it may be interesting to display them as groups of
cameras in the Record window, e.g. all the cameras dedicated to audience. To do
so, proceed as follows:
1. Press the Group button.
A dialog box opens:
2. Enter a name for the group, as it will appear in the Record window, and
press or Enter.
The group line is displayed in the cameras list.
3. Organize your cameras and/or groups by
• pressing the button to move the camera or group to the next line
• pressing the button to move the camera or group to the previous line
Note that the camera name needs to be indented from the group name to be
included within the group.
4. Move the cameras that you do not want to use under the ‘Unused’ group.
Unused cameras
When you are sure that you will not use some of the cameras, move them in the
Unused group. So, they will not be available in the Record window to record take.
To remove the recorder channels from a server from the list of cameras displayed
on the Setup window, place all the channels from this server in the ‘Unused’
group. Then, press the button.
To remove a group name, it must be free of camera. Then, press the button.