EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 74)

INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
Issue 1.0.D
67
4. Load the trains on playback channels in the same way as the loading of
clips.
Load the trains one by one by selecting the camera/recorder channel line in
the Record tab, then the playback channel line in the Review tab and finally
press the Load Input button .
5. Load the trains on preset of playback channels by pressing the Presets
button
and selecting a Preset configuration from the list.
Trains are loaded on the playback channels from the Preset configuration.
6. You can unload a train by selecting the line in the Review tab and pressing
the Unload Input button.