EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 40)

INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
Issue 1.0.D
33
2. Enter a name for the whole project/production in the Name field.
3. If you want to apply Active Mode setting specific to this new project, open
the Active Mode tab and modify the selected options. Refer to section 3.2.1
‘User General Settings on page 7 for a detailed explanation of the setting.
4. Select the configuration for your project: open the Configuration tab where
you can
• select an existing configuration from the Configurations list,
• add a new configuration with the Add New Configuration button
• copy and edit the selected configuration by pressing the Copy Current
Configuration and Edit button
.
Refer to section 3.2.2 ‘Predefined Configurations Settings’ on page 9 for a
detailed explanation of the options.
5.
Press the Exit button to save your new project.
The new project appears in the Projects list.
4.2.4 H
OW TO
U
PDATE
P
ROJECT
S
ETUP
C
ONFIGURATION
To edit the setup configuration relative to an existing project, or to rename it,
proceed as follows:
1. In the Project/Production window, click on the project you want to edit
The project line is highlighted.
2. Press the Project Setup button located on the project line.
The Edit Project/Production window opens and the settings selected at
project creation for the active mode and for the predefined configuration are
displayed.