Setting up web interface management, Setting up web interface management” o – 3Com 2924-PWR User Manual

Page 27

Setting Up Web Interface Management

Setting Up Web
Interface
Management

This section describes how you can set up web interface management
over the network.

Prerequisites

■

Ensure you have already set up the switch with IP information as
described in “Methods of Managing a Switch” on page 19.

■

Ensure that the switch is connected to the network using a Category 5
twisted pair Ethernet cable with RJ-45 connectors.

■

A suitable Web browser.

Choosing a Browser

To display the web interface correctly, use one of the following Web
browser and platform combinations:

For the browser to operate the web interface correctly, JavaScript and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings.

The switch’s Web interface supports both secure (HTTPS) and non-secure
(HTTP) connections.

Table 4 Supported Web Browsers and Platforms

Browser

Platform

Windows 2000

Windows XP

Windows Vista

Internet Explorer 6

Yes

Internet Explorer 7

Yes

Firefox 1.5

Yes

Firefox 2

Yes

Netscape 8

Yes