3Com 2924-PWR - Manual (Page 19)

Setting Up for Management 19
Setting Up for
Management To make full use of the features offered by your switch, and to change
and monitor the way it works, you have to access the management
software that resides on the switch. This is known as managing the
switch. Managing the switch can help you to improve the efficiency of
the switch and therefore the overall performance of your network.
This section explains the initial set up of the switch and the different
methods of accessing the management software to manage a switch. It
covers the following topics:
■
Methods of Managing a Switch
■ Switch Setup Overview
■ Manually set the IP Address using the Console Port
■ Viewing IP Information using the Console Port
■
Setting Up Web Interface Management
■ Setting Up SNMP Management V1 or V2
■ Default Users and Passwords
Methods of
Managing a Switch To manage your switch you can use one of the following methods:
■
Web Interface Management
■ SNMP Management
In addition, you can use the Command Line Interface through the
Console port for basic operations of the switch including setting and
viewing the IP address, configuring user accounts, upgrading switch
firmware, and more. Refer to “3Com CLI Reference Guide” on page 227.
Web Interface
Management
Each switch has an internal set of web pages that allow you to manage
the switch using a Web browser remotely over an IP network (see
Figure 2).