Viewing bandwidth settings, Ingress rate limit – 3Com 2924-PWR User Manual
Page 170
170
C
HAPTER
13: C
ONFIGURING
Q
UALITY
OF
S
ERVICE
Viewing Bandwidth
Settings
The Bandwidth Summary Page displays bandwidth settings for a specified
interface.
To view Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Summary. The Bandwidth
Summary Page opens:
Figure 84 Bandwidth Summary Page
The Bandwidth Summary Page contains the following fields:
■
Interface — Displays the interface for which rate limit and shaping
parameters are defined.
Ingress Rate Limit
■
Status — Indicates the ingress rate limiting status on the interface.
The possible field values are:
■
Enable — Ingress rate limiting is enabled on the interface.
■
Disable — Ingress rate limiting is disabled on the interface. This is
the default.
■
Rate Limit — Indicates the ingress traffic limit for the port. The field
range is 3,500-1,000,000 kbits per second.