3Com 2924-PWR - Manual (Page 105)

105
■ Speed — Displays the configured rate for the port. The port type
determines what speed setting options are available. Port speeds can
only be configured when auto negotiation is disabled. The possible
field values are:
■
10 — Indicates the port is currently operating at 10 Mbps.
■
100 — Indicates the port is currently operating at 100 Mbps.
■
1000 — Indicates the port is currently operating at 1000 Mbps.
■
Auto — Use to automatically configure the port.
■ Duplex — Displays the port duplex mode. This field is configurable
only when auto negotiation is disabled, and the port speed is set to
10M or 100M. This field cannot be configured on LAGs. The possible
field values are:
■
Auto — Use to automatically configure the port.
■
Full — The interface supports transmission between the device and
its link partner in both directions simultaneously.
■
Half — The interface supports transmission between the device
and the client in only one direction at a time.