3Com 2924-PWR - Manual (Page 135)

Configuring Address Tables 135
■ State — Filters the list of MAC addresses displayed according to the
type of MAC address configuration. Possible values are:
■
All — Displays all MAC addresses assigned to the port.
■
Static — Displays static MAC addresses assigned to the port.
■
Dynamic — Displays dynamic MAC addresses assigned to the port.
■
MAC Address — Displays MAC addresses currently listed in the MAC
address table, filtered by the selected value of the State field.
■
VLAN ID — Displays the VLAN ID associated with the port and MAC
address.
■ State — Displays the MAC address configuration method. Possible
values are:
■
Config Static — Indicates the MAC address is statically configured.
■
Config Dynamic — Indicates the MAC address is dynamically
configured.
■ Port Index — Indicates the port through which the address was
learned.
■ Aging Time — Indicates the amount of time the MAC address
remains in the Dynamic Address table before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.