3Com 2924-PWR User Manual
Page 166
166
C
HAPTER
13: C
ONFIGURING
Q
UALITY
OF
S
ERVICE
To configure CoS values to queues:
1 Click Device > QoS > CoS to Queue > Setup. The CoS to Queue Setup
Page opens:
Figure 80 CoS to Queue Setup Page
The CoS to Queue Setup Page contains the following fields:
■
Restore Defaults — Restores the device factory defaults for mapping
CoS values to a forwarding queue.
■
Class of Service — Specifies the CoS priority tag values, where 0 is
the lowest and 7 is the highest.
■
Queue — Defines the traffic forwarding queue to which the CoS
priority is mapped.
2 Define the queue number in the Queue field next to the required CoS
value.
3 Click
. The CoS value is mapped to a queue, and the
device is updated.