ZyXEL Communications 660HW Series - Manual (Page 99)

Prestige 660H/HW Series User’s Guide
Chapter 7 Wireless LAN (Prestige 660HW) 98
7.8 Configuring RADIUS
To set up your Prestige’s RADIUS server settings, click WIRELESS LAN, RADIUS. The
screen appears as shown.
Figure 35 RADIUS
The following table describes the fields in this screen.
Password Enter a password of up to 31 printable characters (including spaces; alphabetic
characters are case-sensitive) if you’re using MD5 encryption and maximum 14 if you’re
using PEAP.
Back Click Back to go to the main wireless LAN setup screen.
Apply Click Apply to save these settings back to the Prestige.
Cancel Click Cancel to begin configuring this screen again.
Table 22 Local User Database (continued)
LABEL DESCRIPTION
Table 23 RADIUS
LABEL DESCRIPTION
Authentication Server
Active Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Server IP Address Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.