ZyXEL Communications 660HW Series - Manual (Page 94)

Prestige 660H/HW Series User’s Guide
93 Chapter 7 Wireless LAN (Prestige 660HW)
Figure 31 Wireless LAN: 802.1x/WPA: 802.1xl
The following table describes the labels in this screen.
Table 19 Wireless LAN: 802.1x/WPA: 802.1x
LABEL DESCRIPTION
Wireless Port
Control
To control wireless station access to the wired network, select a control method
from the drop-down list box. Choose from No Authentication Required,
Authentication Required and No Access Allowed.
The following fields are only available when you select Authentication Required.
ReAuthentication
Timer
(in Seconds)
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. This field is activated only when you select
Authentication Required in the Wireless Port Control field.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Idle Timeout
(in Seconds) The Prestige automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
This field is activated only when you select Authentication Required in the
Wireless Port Control field. The default time interval is 3600 seconds (or 1 hour).
Key Management
Protocol
Choose 802.1x from the drop-down list.