ZyXEL Communications 660HW Series - Manual (Page 339)

Prestige 660H/HW Series User’s Guide
Chapter 37 Remote Management 338
C
H A P T E R
37
Remote Management
This chapter covers remote management (SMT menu 24.11).
37.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
When you configure remote management to allow management from the WAN, you still need
to configure a firewall rule to allow access. See the firewall chapters for details on configuring
firewall rules.
37.2 Remote Management
To disable remote management of a service, select Disable in the corresponding Server
Access field.
Enter 11 from menu 24 to display Menu 24.11 — Remote Management Control.
37.2.1 Remote Management Setup
You may manage your Prestige from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
• WAN only (Internet)
• ALL (LAN and WAN)
• LAN only
• Disable (Neither)
If you enable remote management of a service, but have applied a filter to block the service,
then you will not be able to remotely manage the Prestige using the service.
Enter 11, from menu 24, to display Menu 24.11 — Remote Management Control (shown
next).