ZyXEL Communications 660HW Series - Manual (Page 57)

Prestige 660H/HW Series User’s Guide
Chapter 2 Introducing the Web Configurator 56
UPnP Use this screen to enable UPnP on the Prestige.
Logs Log Settings Use this screen to change your Prestige’s log settings.
View Log Use this screen to view the logs for the categories that you
selected.
Media Bandwidth
Management
Summary Use this screen to allocate an interface's outgoing capacity to
specific types of traffic.
Class Setup Use this screen to define a bandwidth class.
Monitor Use this screen to view bandwidth class statistics.
Maintenance
System Status This screen contains administrative and system-related
information.
DHCP Table This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
Any IP Table Use this screen to allow a computer to access the Internet
without changing the network settings of the computer, when the
IP addresses of the computer and the Prestige are not in the
same subnet.
Wireless LAN Association List This screen displays the MAC address(es) of the wireless
stations that are currently logged in to the network.
Diagnostic General These screens display information to help you identify problems
with the Prestige general connection.
DSL Line These screens display information to help you identify problems
with the DSL line.
Firmware Use this screen to upload firmware to your Prestige
LOGOUT Click this label to exit the web configurator.
Table 3 Web Configurator Screens Summary (continued)
LINK SUB-LINK FUNCTION