ZyXEL Communications 660HW Series - Manual (Page 314)

Prestige 660H/HW Series User’s Guide
313 Chapter 34 System Information and Diagnosis
Figure 204 Menu 24.2.1 System Maintenance: Information
Menu 24.2.1 - System Maintenance - Information
Name: P660HW
Routing: IP
ZyNOS F/W Version: V3.40(PE.8) | 12/23/2004
ADSL Chipset Vendor: TI AR7 03.00.09.00
Standard: Multi-Mode
LAN
Ethernet Address: 00:a0:c5:99:96:23
IP Address: 192.168.1.1
IP Mask: 255.255.255.0
DHCP: Server
Press ESC or RETURN to Exit:
The following table describes the fields in this menu.
Table 106 Menu 24.2.1 System Maintenance: Information
FIELD DESCRIPTION
Name Displays the system name of your Prestige. This information can be changed in
Menu 1 – General Setup.
Routing Refers to the routing protocol used.
ZyNOS F/W Version Refers to the ZyNOS (ZyXEL Network Operating System) system firmware
version. ZyNOS is a registered trademark of ZyXEL Communications
Corporation.
ADSL Chipset
Vendor
Displays the vendor of the ADSL chipset and DSL version.
Standard This refers to the operational protocol the Prestige and the DSLAM (Digital
Subscriber Line Access Multiplexer) are using.
LAN
Ethernet Address Refers to the Ethernet MAC (Media Access Control) of your Prestige.
IP Address This is the IP address of the Prestige in dotted decimal notation.
IP Mask This shows the subnet mask of the Prestige.
DHCP This field shows the DHCP setting (None, Relay or Server) of the Prestige.
34.3.2 Console Port Speed
You can set up different port speeds for the console port through Menu 24.2.2 – System
Maintenance – Console Port Speed. Your Prestige supports 9600 (default), 19200, 38400,
57600 and 115200 bps. Press [SPACE BAR] and then [ENTER] to select the desired speed in
menu 24.2.2, as shown in the following figure.