beautypg.com

3 remote management and nat, 4 system timeout, 3 remote management and nat 37.4 system timeout – ZyXEL Communications 660HW Series User Manual

Page 341

background image

Prestige 660H/HW Series User’s Guide

Chapter 37 Remote Management

340

37.3 Remote Management and NAT

When NAT is enabled:

• Use the Prestige’s WAN IP address when configuring from the WAN.
• Use the Prestige’s LAN IP address when configuring from the LAN.

37.4 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The Prestige automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when it is continuously
updating the status in menu 24.1 or when sys stdio has been changed on the command

line.

This manual is related to the following products: