Command interpreter, Command syntax, Command usage – ZyXEL Communications 660HW Series User Manual

Page 431: Appendix i command interpreter, Command syntax command usage

Prestige 660H/HW Series User’s Guide

430

P P E N D I X

Command Interpreter

The following describes how to use the command interpreter. Enter 24 in the main menu to
bring up the system maintenance menu. Enter 8 to go to Menu 24.8 - Command Interpreter
Mode. See the included disk or zyxel.com for more detailed information on these commands.

Note: Use of undocumented commands or misconfiguration can damage the unit and

possibly render it unusable.

Command Syntax

• The command keywords are in courier new font.
• Enter the command keywords exactly as shown, do not abbreviate.
• The required fields in a command are enclosed in angle brackets <>.
• The optional fields in a command are enclosed in square brackets [].
• The |symbol means or.

For example,

sys filter netbios config

means that you must specify the type of netbios filter and whether to turn it on or off.

Command Usage

A list of valid commands can be found by typing help or ? at the command prompt. Always

type the full command. Type exit to return to the SMT main menu when finished.

This manual is related to the following products:

660H Series