ZyXEL Communications P-2608HWL-Dx Series - Manual (Page 75)

P-2608HWL-Dx Series User’s Guide
Chapter 5 Bandwidth Management Wizard 75
2 Click BANDWIDTH MANAGEMENT SETUP.
Figure 36 Wizard: Welcome
3 Activate bandwidth management and select to allocate bandwidth to packets based on the
packet size or services.
Figure 37 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
4 Use the next wizard screen to select the services that you want to apply bandwidth
management and select the priorities that you want to apply to the services listed.
Table 17 Bandwidth Management Wizard: General Information
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device’s WAN, LAN or WLAN
port.
Select Auto Classifier to automatically allocate bandwidth to packets based on the
packet size or Services Setup to allocate bandwidth based on the service
requirements.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.