ZyXEL Communications P-2608HWL-Dx Series - Manual (Page 366)

P-2608HWL-Dx Series User’s Guide
366 Appendix A Product Specifications
P-2608HW/HWL-Dx Series Power Adaptor Specifications
Voice Features SIP version 2 (Session Initiating Protocol RFC 3261)
SDP (Session Description Protocol RFC 2327)
RTP (RFC 1889)
RTCP (RFC 1890)
Voice codecs (coder/decoders) G.711, G.729
G.168 echo cancellation (8ms ~ 16ms)
Fax and data modem discrimination
Silence Suppression / Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Dynamic Jitter Buffer (Adaptive)
DTMF Detection and Generation
DTMF: In-band and Out-band traffic (RFC 2833),(PCM), (SIP INFO)
Point-to-point call establishment between two IADs
Quick dialing through predefined phone book, which maps the phone dialing
number and destination URL.
Multiple SIP number registration and multiple signaling handling
capability.(per POTS port)
Caller ID support
Flexible Dial Plan (RFC3525 section 7.1.14)
Multiple SIP Accounts / Phone Numbers- Freely assignable Numbers to
Each Phone Port (8 SIP accounts supported)
PSTN Line allows you to make calls via your regular phone line even when
the ZyXEL Device loses power.
Other Features Any IP
Zero Configuration (VC auto-hunting)
Traffic Redirect
Dynamic DNS
IP Alias
IP Policy Routing
SPTGEN
QoS
Table 143 Firmware Specifications (continued)
Table 144 P-2608HW/HWL-Dx Series Power Adaptor Specifications
DC MODEL PLUG STANDARDS
DC Power Adapter Model NU40-2180200-I3
Input Power AC 100~240V/50/60Hz, 1.2A
Output Power DC 18Volts/2.0A
Power Consumption 22W
Safety Standards UL, CUL (UL 60950 Third Edition, CSA C22.2
NO. 60950) ITS-GS, CE (EN 60950-1), (AS/NZS
60950: 2000)