ZyXEL Communications P-2608HWL-Dx Series - Manual (Page 285)

P-2608HWL-Dx Series User’s Guide
Chapter 21 Bandwidth Management 285
21.9.1 Rule Configuration
Click the Edit icon or User define in the Service field to configure a bandwidth management
rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity (bandwidth
budgets) to specific applications and/or subnets.
Figure 155 Bandwidth Management Rule Configuration
See Appendix D on page 387 for a list of commonly-used services. The following table
describes the labels in this screen.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 112 Bandwidth Management: Rule Setup (continued)
LABEL DESCRIPTION
Table 113 Bandwidth Management Rule Configuration
LABEL DESCRIPTION
Rule Configuration
Active Select this check box to have the ZyXEL Device apply this bandwidth
management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.