beautypg.com

ZyXEL Communications P-2608HWL-Dx Series User Manual

Page 51

background image

P-2608HWL-Dx Series User’s Guide

Chapter 2 Introducing the Web Configurator

51

VPN

Setup

Use this screen to configure each VPN tunnel.

Monitor

Use this screen to look at the current status of each VPN tunnel.

VPN Global

Setting

Use this screen to allow NetBIOS traffic through VPN tunnels.

Certificates

My Certificates

Use this screen to generate and export self-signed certificates or

certification requests and import the ZyXEL Device’s CA-signed certificates.

Trusted CAs

Use this screen to save CA certificates to the ZyXEL Device.

Trusted Remote

Hosts

Use this screen to import self-signed certificates.

Directory Servers Use this screen to configure a list of addresses of directory servers (that

contain lists of valid and revoked certificates).

Advanced

Static Route

Static Route

Use this screen to configure IP static routes to tell your device about

networks beyond the directly connected remote nodes.

Bandwidth

MGMT

Summary

Use this screen to configure bandwidth management on an interface.

Rule Setup

Use this screen to define a bandwidth rule.

Monitor

Use this screen to view the ZyXEL Device’s bandwidth usage and

allotments.

Dynamic DNS

This screen allows you to use a static hostname alias for a dynamic IP

address.

Remote MGMT WWW

Use this screen to configure through which interface(s) and from which IP

address(es) users can use HTTP to manage the ZyXEL Device.

Telnet

Use this screen to configure through which interface(s) and from which IP

address(es) users can use Telnet to manage the ZyXEL Device.

FTP

Use this screen to configure through which interface(s) and from which IP

address(es) users can use FTP to access the ZyXEL Device.

SNMP

Use this screen to configure your ZyXEL Device’s settings for Simple

Network Management Protocol management.

DNS

Use this screen to configure through which interface(s) and from which IP

address(es) users can send DNS queries to the ZyXEL Device.

ICMP

Use this screen to set whether or not your device will respond to pings and

probes for services that you have not made available.

UPnP

General

Use this screen to turn UPnP on or off.

Maintenance

System

General

Use this screen to configure your device’s name, domain name,

management inactivity timeout and password.

Time Setting

Use this screen to change your ZyXEL Device’s time and date.

Logs

View Log

Use this screen to display your device’s logs.

Log Settings

Use this screen to select which logs and/or immediate alerts your device is

to record. You can also set it to e-mail the logs to you.

Table 4 Navigation Panel Summary

LINK

TAB

FUNCTION