ZyXEL Communications P-2608HWL-Dx Series - Manual (Page 298)

P-2608HWL-Dx Series User’s Guide
298 Chapter 23 Remote Management Configuration
23.6 Configuring FTP
You can upload and download the ZyXEL Device’s firmware and configuration files using
FTP, please see
Chapter 27 on page 331 for details. To use this feature, your computer must
have an FTP client.
To change your ZyXEL Device’s FTP settings, click Advanced > Remote MGMT > FTP
tab. The screen appears as shown.
Figure 162 Remote Management: FTP
The following table describes the labels in this screen.
Table 117 Remote Management: FTP
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.