5 general wireless lan screen, Figure 61 wireless lan: general – ZyXEL Communications P-2608HWL-Dx Series User Manual
Page 123

P-2608HWL-Dx Series User’s Guide
Chapter 9 Wireless LAN
123
9.5 General Wireless LAN Screen
Note: If you are configuring the ZyXEL Device from a computer connected to the
wireless LAN and you change the ZyXEL Device’s SSID or WEP settings, you
will lose your wireless connection when you press Apply to confirm. You must
then change the wireless settings of your computer to match the ZyXEL
Device’s new settings.
Click Network > Wireless LAN to open the Wireless LAN General screen.
Figure 61 Wireless LAN: General
Authentication
The process of verifying whether a wireless device is allowed to use the
wireless network.
Max. Frame Burst
Enable this to improve the performance of both pure IEEE 802.11g and mixed
IEEE 802.11b/g networks. Maximum Frame Burst sets the maximum time that
the ZyXEL Device transmits IEEE 802.11g wireless traffic only.
Fragmentation
Threshold
A small fragmentation threshold is recommended for busy networks, while a
larger threshold provides faster performance if the network is not very busy.
Roaming
If you have two or more ZyXEL Devices (or other wireless access points) on
your wireless network, you can enable this option so that wireless devices can
change locations without having to log in again. This is useful for devices, such
as notebooks, that move around a lot.
TERM
DESCRIPTION